SV08

I use several printers, mk3.5, core one, P1P, H2S, Sovol SV08MAX, (will soon add a Sovol ZERO) The cheapest solution, not repair but upgrade the mk3, you can convert the mk3 into a mk3.5: https://www.prusa3d.com/product/original-prusa-i3-mk3s-to-mk3-5s-upgrade-kit-5/ This calls 279€ no einsy MCU nee

edit actually, I see now that those are Voron builds with green accents, not the ratrig vcore. So I guess feedback would mostly pertain to sovol performance I'm currently going back and forth between a RatRig Vcore and Sovol SV08 Max, in search of a 500mm build volume. Since you appear to run both,

If cosplay armor is your only goal then maximizing build volume might be convenient. The H2S is decently large but it’s not what I would call an XL printer. The sovol sv08 max is 500x500 for less than the H2S and the anycubic kobra max is a 400 x 400 machine that’s less than both of those. Smaller m

When you say “large”, how large do you mean? If you’re looking for maximum volume, I think the Sovol SV08 Max is your best bet. But if you’re looking to handle more engineering grade filaments, I’d seriously look into the Qidi Max 4. The P2S and Centari are middle of the road with regard to print vo

I would strongly recommend an enclosed core x/y printer versus a bed slinger. Check these out; Bambu P1S Combo Bambu P2S Combo Bambu X2D Combo Qidi Q2 Combo Qidi Plus4 Combo Elegoo CC Elegoo CC2 FlashForge AD5X Anycubic Kobra S1 Combo Anycubic Korba S1 Max Sovol SV08 (Add open source multi color of

Sv08 max is pretty near with the eddy sensor. The build size is 500x500x500 so it's pretty big. You can also add in a optional chamber heater, or go with the biqu panda breath....

Look into the Sovol SV08 Max (slightly larger than youneed) and Prusa XL (slightly smaller than you need). I feel like if you don’t need multicolor you’re looking at an SV08 Max. Big printers really skyrocket in price above those for commercial use at that size. Sovol SV08 Max should be able to use

I think the big question is "do you need all three items from this list: multi-color, large volume and engineering filaments". If so it's worth considering. For multicolor and engineering filaments alone a Q2 is a safer option. For multicolor and smaller volume a Snapmaker U1 is a very good option a

IMO the 2 brands are not really comparable. A brand like Sovol (with its questionable support and lots of tinkering needed sometimes) only makes sense if they offer something that the "better" brand does not. For example none of the "affordable" BL printers offer a 300x300 bed. I paid 170€ for my SV

To build a printer makes sense because you learn so much. Building a voron may be seen in different ways. The old school hardcore way self sourcing anything and spending 3k$ to get a voron 2.4. Or buying an good quality kit like the LDO ones and spend 1.600$. Or have a look at Sovol they cloned voro