SV06 ACE

Fuck Slice. At first, they looked like a good company. Then they turned into patent trolls who are slowing innovation of hotends (for example Slice vs Goliath hotend) and now the are trying to use another nozzle "standard". We are having shitload of nozzle designs, it is already very hard to get rig

They are the absolute worst when it comes to customer service. I have a Q2 that likes to nose dive into the build plate at first home sometimes. After the first time it did it very aggressively and it didn't stop so I hit the power button on back and figured I must have imagined it. Second time I wa

At least you know it isn't the slicer, so it must be mechanical or filament, sounds like it isn't filament so logic says mechanical? Have you tried a small cylinder (say 40mm high) in vase and ordinary mode (ie no fill) I have a sovol sv06 ace and have endless faults with it (seriously think I've go

Do not go for a sovol sv06 ace, had nothing but problems. Look at the bambu A1, that's the other one I was going to buy

I have mine in this Yoopai enclosure, though I almost never zip it closed. I mostly just print PLA/PETG and TPU. For PLA and TPU I keep the flap completely open, but for PETG I will close the flap but keep it unzipped, that way I can avoid drafts but don't have to heat the whole room so much. My SV0

I had a very similar print error on my Sovol SV06 Ace that I was frustrated with for a month before discovering I needed to tighten the filament tension screw more with .2 mm nozzle than I do with my .4 mm. It was happening for me because the filament was slipping in my extruder. Not sure if the A1

Sovol SV06 ACE with Orca Slicer PETG-HF or PLA (generic brand) 250°C for PETG and 220°C for PLA (within brand specifications for printing) 300 mm/s, but I also encounter the problem when I put the printer at 50% speed 0,6 mm for PETG and 0,3mm for PLA

I don't have a SV08, but i've had this error multiple times on my SV06 ace. It seems it's a recurring issue on the Ace line, and it's made worse by excluding an item during print. https://forum.sovol3d.com/t/shutdown-mid-print-mcu-shutdown-move-queue-overflow/6374 https://www.reddit.com/r/Sovol/comm