Q2C

Any open format like the Bambu A1 will be very limited as to what kind of engineering grade filaments it can print. The strongest filaments work best with a chamber heat of 55 C or higher. That doesn't necessarily mean it needs an actively heated chamber. Throw a blanket or towel on top and most enc

Die Filtersysteme der meisten Drucker sind Alibi-Argumente. Da hängt ein HEPA/AKtivkohle-Filter drin und jeder denkt "Jetzt bin ich sicher". Nur es wird halt vergessen, dass der Filter getauscht werden sollte und dass der Exhaust-Fan auch an sein soll, damit die Luft durch den Filter gezogen wird. U

Hey, new cosplayer here too. Everyone's budget is different but if you are thinking of cosplay, a 3d printer is a must. Don't go ultra cheap and consider the size before buying. These days I would recommend: Bambu P2S (or P1S if initial budget is a concern) I don't like Bambulab as a company, but th

Only have the Q2, not the Q2C, but I'd say yes. AFAIK, Qidi is supposedly going to sell the chamber heater as an add-on, and in any case the printer is made for chamber heat so you could get a 3. party thing (The transparencies are plastic instead of glass on the C version, but I'd be surprised if t

Personally I'd go for a CoreXY enclosed if possible, for a few more $. A bit more complex, but better print quality in general, enclosed can help as you get beyond PLA and PETG for filaments, etc. A few that are decent options at mid-level price ranges: AD5X: https://amzn.to/4tfYNXi Q2C: https://amz

Yea, it should work. You do know you can just order the qidi heater for the q2 for 35 bucks off their site right? Its literally made for the q2, the q2c is the q2 pro just without the heater, air filter and camera but you can add any of those later. You can print abs without the heater, it just make

Qidi q2c is around that price range. The regular q2 is better for engineering grade materials due to the heated chamber.

QIDI Q2C 3D Printer – Qidi Tech EU Online Shop 379€ neu Großartiger Drucker, hab den selbst Sehr gute Druckergebnisse, klatscht einen P1s an die Wand und ist mindestens auf Augenhöhe mit dem P2S Kann so ziemlich alle Filamente drucken, hat aber keine Bauraumheizung oder Webcam /das hat der 100€ teur

Seconding the P1S over CC, 8its a tried and true platform and there are so many times with the CC I dread waiting for parts to take 2 weeks to come or I really feel the little things that just don't work very well like they do on the X1/P1. You could also look at the Qidi Q2C if you want support for

Budget von 400€ inklusive Multicolor? Wenn das Budget keinen Spielraum bietet (und bedenke hier, du brauchst ja auch noch Filament), dann geht kaum ein Weg am A1 Combo von Bambulab vorbei. Es gäbe noch den Anycubic Kobra 3 Combo für einen sehr ähnlichen Preis, aber ich kann dir da leider nicht viel