KH 80 DSP

We can talk anecdotes and opinions all day. If you look at the EBU Tech paper section 2.2, they specify to 40 Hz. The KH80 is -4 dB at 55 Hz. So granted, they don’t quite get there, but I’ll say that even 60 Hz plus some headphones is sufficient. https://tech.ebu.ch/docs/tech/tech3276.pdf https://ww

For your setup, the Kali LP6v2 gives excellent value - wide sweet spot, solid low-end for the price, and pairs well with Sonarworks. In a small untreated room, the Genelec 8010A or Neumann KH 80 will translate better due to tighter imaging and built-in DSP (in KH 80). If you can grab KH 80s used wit

Neumann KH 80 + KH 750 or Genelec 8030 + 7050, both with DSP room correction. The bass won't be excessive with properly placed and tuned sub, actually it will be excellent. I personally recommend purchasing a measurement mic, it will help with positioning and equalization - the results will pleasant

i auditioned a bunch of these, and some much higher up, recently. all of them are good-to-great. I also heard a $100k Genelec installation around the same time so I think I have an OK frame of reference. Gen 8020 was a bit bass-light. Gen 8030 sounded amazing but the bass was a bit tubby and indisti

Good question - i was going to add this but didnt have much time yesterday. The MA-1 calibration with Neumann helps by EQ correction, as well as phase and delay - which can be very helpful for subs. But you're right, you want to get the placement as flat as possible so it doesnt have to do so much c