T1 Max

I've been using the Viking3DK ones... they seem to work pretty well. https://makerworld.com/en/models/1642037-flashforge-adventurer-5m-pro-pla-profiles-orca They made a good set I downloaded for my FLSun T1 Pro as well.

Honestly it worked really well. Ive had a few people do this after I showed them and most people just do 1 bentobox and they've said that it worked just fine. I opted for 2 because the t1/t1 pro has a pretty large enclosure compared to a bambulab enclosure that the bento was originally designed for.

Fair enough on all. I am finishing my second complete hot summer in TX, and our house temp is already at 78 for most of the day. I really don't think temp is an issue for me, but if I fail again I'll definitely employ that as a fix. All my bed adhesion and a few other issues disappeared as soon as I

All good points! I’m still learning and experimenting- been printing less than 2 years. I’m most interested in your comments about tall and slender. I also have a FLSun T1 Pro, and it’s twice as fast as everything else I have and still produces great surfaces, except tall and slender and I mean real

Cool - I'm always looking for a useful gadget/bracket, whatever for my end of rolls. I've done mid print filament changes on my QIDIs, works very well (as does the Prusa Mk4/S), but not sure on the T1Pro - need to try that - other than that (and it took me 3 tries to get a good one - FLSun support g

I'm putting on a Dragon Burner with a V6 hotend I had sitting around and a Biqu Nebula extruder that looked cool. To make this work, I printed AfterBearner X gantry parts, which move the rods closer together so the extruder motor can sit above the rods. I'm swapping the board with a BTT SKR V1.4 Tur

V400 is an excellent machine, although with mine I’ve never quite gotten dimensional accuracy to where it needs to be. I agree that this is the best machine FLsun has made. After tearing into my less than a full day old T1 Pro and having done a lot of work to my V400, build quality between the two i

I print PET-G exclusively. On the FLSun T1 Pro. Same PEI plate as well. We don't use any glue sticks or anything. Your issue is with the Z-height. It's way too high. It looks like you're putting frosting on a cake. Have your run the auto bed leveler? Do that, then print a first layer test, until you

This guy went crazy on the number of arms options but seems to have done a pretty good job https://makerworld.com/en/models/559282-flsun-t1-part-fan-ducts-1-duct-to-5-ducts?from=search#profileId-478439 I'm using this one - the Need It / Make It guy is great! It prints overhangs much better and does

This guy went crazy on the number of arms options but seems to have done a pretty good job https://makerworld.com/en/models/559282-flsun-t1-part-fan-ducts-1-duct-to-5-ducts?from=search#profileId-478439 I'm using this one - the Need It / Make It guy is great! It prints overhangs much better and does