S1 Pro

Check the sliced previews. More specifically the layer time, flow, and speed previews. If your layer time preview has the same pattern, try changing your infill type to rectilinear. Check the preview again. If it looks even, or better than it was, try printing it to see if the banding goes away. Sou

I own one. Out of the following brands ive bought. Bambu, flsun, elegoo, anycubic, and sovol. Sovol is the 2nd best imo. It does have vfas though. Im not a huge tuner and cant tell you if it van be tuned out easily. But part quality pit of the box is pretty good. This is compared to an elegoo neptun

I have had 3 different FLSUN machines, and they were all DEFECTIVE. The support doesn’t give a f*** either. I’m returning my defective s1 pro and getting a p2s combo. DO NOT BUY FLSUN

That is a 2.3 board with the 35V caps. Try and replace with 2.4 board with 50V caps. The early T1 Pro pre orders had S1 Pro silver CPAP and 2.3 boards. Post release have pink cpap and 2.4 boards. I’m sure there could be zombie combinations but that is what I have discovered in my fleet and from talk

I love my S1 Pro, though it took a week of dialing in and figuring out settings to make it print at a similar quality to my Bambu A1 Mini. But once that was figured out, it’s been great! Print quality is fantastic and it’s so fast, even with my setting tuned to favor print quality! One thing I’ve ex

AI to the rescue The FLSUN S1 and S1 Pro are both high-speed delta 3D printers, and they share many core features. However, the S1 Pro is an updated version that brings several key improvements and refinements. Think of it less as a complete overhaul and more as an "S1.5" with enhancements that impr

It sucks when companies shirt blame to others. Sorry you’re struggling with that. I’ve heard filing a consumer protection claim with your states attorney general or similar will often get companies to do the right thing to avoid hassle. I have to ask though, looking at the FLSUN S1 on Microcenter an

I have an S1 pro and I'm feeling the same. Not quite giving it away yet, but I'm on effector #3 and it worked all of 1 second before getting a clog that required full disassembly. FLSUN support hasn't responded to my email (it's been weeks). Printer has been down probably 8.5 of the ten months I've

It's super common practice on cheap machines to stop the plugs vibrating out. Flsun. Anycubic, elegoo, crality. It's worse when you try to replace the heater for the hotend the plugs glued so well it can rip off the plastic of the circuit board. Prusa and Bambu are the only printers that don't go he

There’s only a select few YouTubers who will give real opinions. The rest are just advertising. I remember when they were all advertising the Flsun S1 pro, oh man what a hunk of junk that printer was. Looked cool and moved fast, but that’s where the good stopped lol.