Kobra

$50 of it is the motors and mechanical bits. The other $250 is the software that makes it work seamlessly with the printer. There’s a reason other companies implementations are not nearly as good. I’ve tried the anycubic kobra and crealities version and it’s nowhere near as good quality.

1- Why do I not have access to SSH into this printer? 2-Why did you insist on making your own Makerworld/Orca Slicer/ Klipper Copy/Fork? 3- Why are there 3 different hotend styles for the same name Kobra 3? 4-Why did you choose to run all of the ptfe tubes all the way to the hotend on the K3?- Why i

We have to work around this since the Kobra X doesn't have a 0.2 / 0.25 hardened nozzle profile yet And since nozzles of that diameter for the Kobra X are sold almost exclusively in hardened versions, it’s complicated. Keep the 0.4 hardened profile on the printer so that PID control is accurate, ins

Why did you release Anycubic Slicer Next, instead of allowing integration with Orca Slicer? Why didn't you port over the per colour transition purge volume configuration feature from Orca? I'm having bleeding issues with dark to light colour transition on the Kobra 3 Combo. Why does your LAN mode no

I’d recommend skipping the Kobra X and stay with the A1. It’s proven, and with the Anycubic you’re essentially a beta tester at this point. The one thing I learned switching from Anycubic printers to Bambu - you get what you pay for. They cost less, sure. Are they as reliable in the long term? Hell

Hey, The following calibrations are required during the first startup: PID (heating optimization), automatic leveling, vibration compensation (input shaping), and motor noise reduction The Kobra X offers automatic flow and pressure advance calibration, but this runs at the start of every print, wast

I’ve had nothing but problems since the last Anycubic Slicer Next update (1.4.1.0), and my Kobra X has decided to turn into a Geco coldplate-eating drill

I have a Kobra S1 and its SUPER wasteful. There's a purge ratio you can adjust on screen but if you want finer control you have to install Rinkhals (which is a Klipper layer to sit over their closed firmware) and make adjustments in Klipper. Elegoo offers so much more control over your printer. So I

ABS runs at 255 on my S1. (hardened steel nozzle, ceramic heating element from Ali.) Also, the stock profie for ABS in ACSN is absolute garbage. I used this as a starting point and didn't vary much: https://www.reddit.com/r/AnycubicKobraS1/comments/1jhi9nt/abs_in_kobra_s1/

The only Anycubic printer that should be under consideration is the Anycubic Kobra X. The Kobra 2 Neo is reaching end of life and is missing a lot of modern features that will make your printing experience easier.