Kobra

So this is my first Bambu Labs printer. The printer I was using previously was the Anycubic Kobra S1 combo and when it comes to color swapping I was always running into layer swifts but with H2C no issue outta the box at all.

Why did you release Anycubic Slicer Next, instead of allowing integration with Orca Slicer? Why didn't you port over the per colour transition purge volume configuration feature from Orca? I'm having bleeding issues with dark to light colour transition on the Kobra 3 Combo. Why does your LAN mode no

A seemingly inconsequential relocation of the spool holder on my printer (from right middle on the old I3 to left back, pointing backwards on Kobra 3) has been the source of the worst headaches i ever had over any printer malfunction i ever had. Thank you anycubic for forcing my filament dryer (Spac

I use this one: https://cults3d.com/en/3d-model/tool/anycubic-kobra-s1-poop-chute-catch The downside is it doesn’t detach but I chose it because it doesn’t block the fan vent! A lot of them do! Since Anycubic cheaped out on a lot of stuff with this to get the price down, I wouldn’t fancy altering es

According to the information I have, Anycubic is releasing this Kobra 4 to reduce the cost and complexity of assembling and repairing the Ace Gen 2 print head on the Kobra X. This way, they can sell it at a lower price for single-color, while the Ace 2 Pro will be required for multi-color. Other tha

Die Frage ist, was du drucken willst und wie groß. Und ob du mehrfarbig drucken willst. Der Kobra X ist ein Bettschubser, offen. Braucht wegen des sich vor und zurück bewegenden Bettes mehr Platz in der Tiefe. Kein Gehäuse, also sind bestimmte Materialien schwierig oder gar nicht druckbar (ASA/ABS w

Ah, that's the kobra 3 max. I have the same issue. It's related to slot #4 refusing to load filament and when it does, after a job is done, it does that (at least on mine). If you haven't, try loading slot #4 (or maybe other slots) and see if has issues. I think there's a firmware problem they need

Same. I got the Anycubic Kobra 3 and S1 when they came out with all the excitement from the craze. The time it takes and the waste immediately put a sour taste in my mouth and barely used the ACE for multicolor. The U1 was the answer to everything I wanted. Creality and Anycubic forced me to play tr

Natürlich muss es nicht immer Bambu Lab sein und wenn ich selbst einen neuen Mehrfarb-Bettschubser kaufen müsste, würde meine Wahl auf den Kobra X fallen. Zum Kobra 3 und 4 muss man aber schon noch was sagen: Ich hatte den 3er, der ging nach einer Woche zurück, weil das Druckbett sich bereits bei 60

None of the above. Given your use cases and options you posted. And here’s the non fanboy why. I have an Elegoo Saturn 16k resin printer and mine has been trouble free from day 1. 1 support ticket regarding what I observed as a burr on the vat that eventually led to seepage outside the printable are