Kobra

This. My first printer was an Anycubic Kobra. It worked okay-ish but needed constant tinkering. Same from all my friends with their Enders. I then bought an Anycubic Kobra 3v2 and Kobra S1. Both worked fine right out the box but I always had to tweak some settings for pretty much every print. Then I

Why did you release Anycubic Slicer Next, instead of allowing integration with Orca Slicer? Why didn't you port over the per colour transition purge volume configuration feature from Orca? I'm having bleeding issues with dark to light colour transition on the Kobra 3 Combo. Why does your LAN mode no

Bambu Lab A1 wenn Budget klein ist. A1 Combo wenn bisschen mehr Geld möglich ist und der P2S in Combo wenn das Budget so um die 800€ liegt. Glaub mir. Ich hatte vorher einen Anycubic Kobra 2 und da musste ich immer was tüfteln und längere drucke musste ich immer beobachten. Hab dann echt lange überl

If you know bed levelling than only buy anycubic kobra 2 neo else you will be frustratedMy best choice would be a1 mini as it does everything on its ownAll you have to do is design parts on BAMBU STUDIO AS STL FILE.

I had the same problem -- there's a set screw you can loosen to take that 4 into 1 collector off and you can clear it out. And yes, the amount of work to get to that thing is a pain. https://www.reddit.com/r/anycubic/comments/1v20vjx/kobra_x_clogged_hot_end_where_to_now/

It's just the endless hours of troubleshooting that I have done. I don't mind doing some but it started to tear apart complete days and weekends for me. I really wanted to like it. I read so much talk about Bambu and I have always been one to pull for the smaller guy because maybe they had some brig

Unfortunately, I've had much of the same experience. Get used to taking the ace pro apart, you will need to do it often, especially feeder 3. Mine had the additional issue of having a print bed that turns itself into a taco shell when heated, very common issue on this printer. After x amount of hour

I have a CC1 and had 1198 hours on it until I upgraded it with the CC1 Canvas system 2 days ago, and it has been genuinely amazing. The printer is a work horse. I’ve printed only in PLA, PLA + 2.0 and PETG though. Before my CC1, I had an Anycubic Kobra S1 Combo and I had a litany of problems with it

I have 2,500 hours on my original ECC from October, and my November one has about 2,000. I mention this because I've had absolutely flawless results with them. However, I bought an Anycubic Kobra S1 and had nothing but nightmares. I returned it, took a little break, and later decided to give them an

We started with anycubic kobra2, that was 75% tweaking, 25% printing... it was usefull learning curve but also suffering. Wife upgraded to P1S, I was mad on her at that time becuase it costed like 6 kobra's2, untill I saw the prints. HUUUGE step up. 99% printing, 1% tweaking and maintenance. Please