Kobra S1 Combo

Eu tenho uma k1c, ela imprime material de engenharia, a versão C possui bico endurecido para material com carbono. Minha opinião sincera, é uma impressora boa, imprime tudo sem dor de cabeça, mas ela tem alguns problemas que vc precisa ficar atento, mas é possivel imprimir coisas ou fazer upgrades p

Fwiw I love mine, minor grumbles and all - my first FDM so it's been a learning experience. If I had any advice, it would be the common issues I've seen popping up here and experienced myself: - Be wary when changing/removing/replacing hotends - be sure to seat the hotend all the way up when you pul

Dry it. Dry it well. And when you think it's dry, dry it some more... Assuming you have the S1 Combo/Ace Pro, you're going to want to dry it for days if my experience is anything to go by (living in the UK it's fairly humid/wet, especially as I live in a river town). PETG typically needs 60-70C to d

There is actually a new high-flow hotend made by micro swiss: https://www.3djake.de/micro-swiss/flowtech-hotend-for-anycubic-kobra-s1 However it does cost 100€ and I don't know if it's worth it. But it's probably the most high-end hotend you can get at the moment. I would recommend you to just buy t

Cara, eu comprei uma Anycubic Kobra S1 Combo, estou amando, a impressora é ágil, imprimi com muita qualidade e o ACE PRO, um plus a parte, o aquecimento de filamento é maravilhoso. Impressora fechada, com filtro de carvão ativado e HEPA, imprime mais variedades de filamentos e na faixa de preço que

Cara, esquece. Não tem impressora confiável, a impressão 3D não é apertar o botão e imprimir, tem que parametrizar para funcionar, independe de marca, a não ser que você vá comprar apenas filamentos da mesma marca que a impressora. E mesmo assim tem que configurar o fatiador. Tenho uma Anycubic Kobr

I just faced this and I actually chose an Anycubic Kobra S1 - because it came with a multicolor filament feeder that was also a dryer - and was all under $500 usd. I will say I’m incredibly pleased with it out of the box. I’m about to swap in the .2 nozzle and test some of these settings for minis.

The second nozzles (long ones) are clone of the original anycubic. The first one with the short nozzle is a bambulab style clone for the Kobra s1. The bambulab clone heats up much faster and is available with multiple style of nozzles. The ones in the picture are bi-metal meaning it's in brass or co

I think I am starting to get the basics. You are 100 percent right it's becoming fun and interesting. And their is 💯 satisfaction. Iv recently become aware that I actually do have hobbys, and it's awesome that they all can be conjoined. You are lucky to have a prusa! I would love the new one with th

Ich hatte bisher folgende Anycubic 3D Drucker: Kobra 3 Combo Kobra S1 Combo Kobra 2 Max (demnächst) Kobra X Die Kobra 3 (Combo) sind katastrophal, beinahe nicht nutzbar. Bedleveling fehlerhaft, laut, schlecht konstruierter Extruder. Der Kobra S1 Combo ist richtig gut und macht meinem Bambulab P1S ec