AXP90-X47 Full Copper

Specs:

• AMD Ryzen™ 7 9800X3D
• Cooler Master MasterLiquid 240 Atmos
• Thermal Grizzly Duronaut
• Asus ROG STRIX B650E-I GAMING WIFI
• G.Skill Trident Z5 Neo 32 GB (2 × 16 GB) DDR5-5600 CL28
• Samsung 9100 PRO with Heatsink 4 TB
• MSI GeForce RTX™ 5090 VENTUS 3X OC
• FormD T1 V2.5 + Fan Bracket Kit
• Corsair SF1000

First time and am super happy with this build! But, it was actually really hard to put together because the instructions didn’t really cover some important details like how cables should be routed (sort of had to jam things in and hope for the best - “out of sight, out of mind…”) or little things li

New build in my quest for optimal small gaming builds in premium cases.

Specification:

Case: COOJ Sparrow MQ5 gray with mesh and PCIe4 riser

Motherboard: ASRock B650i Lightning WiFi

CPU: AMD Ryzen 5 7600X3D

CPU Cooler: Thermalright AXP90-X47 Full Copper with Noctua NF-A9x14 chromax.black.swap

Unless you already have the 4080 Super or found one at a really good price I would get a 5080 instead, most 4080 Super I look at are as much money. Don't get the NH-L9a, get the Thermalright AXP90-X47 full copper, in cooler tests it runs up to 7C cooler on the 7800X3D.

Specs Part Name Case AnyITX S Air Motherboard Gigabyte B550I Aorus Pro AX AM4 CPU Ryzen 5 3600 CPU Cooler Thermalright AXP90-X47 Full Copper GPU RTX 3070Ti FE Ram 16GB DDR4-3600 G.Skill Trident Z Storage WD Black SN770 1TB NVMe Storage 2 WD Blue SN550 500GB NVMe PSU Corsair SF750 Case Fans 1x Noctua

Have been using a regular ATX PC that I built in 2020 (3700X / 32GB 3200MHz / RTX 2070S) in a Fractal Meshify C, I have been looking around for SFF cases and other components since about 2021/2022, but there wasn't really a big push for me to upgrade. I finally came round the upgrade process this ye

Hi all, I recently built a system with Ryzen 7 9700X and AXP90-X47 (Full copper) cooler in a FormD T1 case with Noctua fan swap and two Noctua 12x25 exhaust fans.

Additionally I'm using the Thermalright contact frame as the stock socket was bending the motherboard and when I installed the AXP coole

I notice that your PC system is only using a i5 12400F CPU... that is considered relatively low powered and easy to cool, even a low profile cooler like the Thermalright AXP90 X47 or X53 Full Copper will be able to handle keeping that chip cool under load. Here are some of my PC setups with an i5 12

After speaking with the creator of the BeamCase SW, I found that the specifications limit the height of the CPU cooler and that the CPU cooler is much too tall for the case. Using something like the Thermalright AXP90 X47 (Full Copper ver.) seems like a very popular choice.

Mounting & Air Duct. I used a custom threaded mounting method. Brackets don't hold the cooler securely enough and look unappealing, so I'm still finalizing the setup. I plan to use a Noctua NA-FD1 fan duct or 3D print a custom STL alternative. ​Case Choice: MQ5 vs. MQ6. You won't gain much by opting