Archer AX73

You’re welcome! It’s just about local network speed. If you get yourself an AX5400, hookup the PC to it you’re set for $150. I use Virtual Desktop which is fantastic for this. https://www.amazon.com/TP-Link-Archer-AX73-High-Speed-Streaming/dp/B08TH4D3QV I tried the cable thing too and honestly it wa

TP-Link Archer GE400 BE65 TP-Link Archer AX73 AX5400 but only has gigabyte port which is good for your speeds as of jow but won't be future ready. More budget friendly: TP-Link WiFi 6 AX1500 Mbps Archer AX10,

Deco and archer models do not mesh together. The only way to get this to work would be to have the decos in AP mode and leave the archer doing the routing. One of the decos would need to be wired to the ax73 and then put the remaining deco where you need it and it will connect wirelessly to the main

I have an Archer AX73, supports multiple devices, fast/reliable, can set a lot of settings and has a mobile app for remote control to see all connected devices. Allows you to block devices, see usage amounts per device, and a lot more. Lets you get extenders (RE715X) that are easy to install around

I'm not sure where but in the advanced section, there's a subsection for vlan settings where you specify which interfaces are for vlan and which are for lan. Your issue may be related to that. I have an AX73 but I don't have access to it at the moment. If that does not help, try a cat 6 cable. Your

I've been on the same boat recently. Have an ISP provided modem/router that supports only 40 devices total (don't know why). Bought a Tp-link AX73, connected to the ISP router, disabled everything on it, moved all devices to AX73. All of my devices began to work happily... Except my Synology. It can

It doesn’t even have to be an ax73 and if you’re gonna go to the route of extender, you can also use those as easy mesh, but no wired backhaul if you get another ax73 or something other than an extender, you can run a wired backhaul. Click on the link I put below and it gives you all the list of eas

I got archer ax73, around 60 devices on WiFi 2.4ghz and rest on 5ghz, 1Gb internet, zero problems hue is overpriced, I'm using Moe's tuya ZigBee things, cheap and good Do you have a mesh system if you are using a few routers?

Bro. Lemme tell you one simple way but u need to spend money. Get the TPLINK xc220 g3v ONT from Amazon. Connect the fiber cable to this ONT, clone the gpon serial and check if it registers. Then use your PPPOE username password and get the internet on this ONT. Now you can switch bridge mode on your

AX73 is easy mesh compatible you could get 1 or 2 more of those and have a decent mesh setup below is the link to tp link archer routers that are easy mesh compatible https://www.tp-link.com/us/easymesh/product-list/