I7

Wait for the creality sparkX i7 seems to have good specs

I made this one, I remixed it from scratch from an another model, printed it with Hyper PLA, and I’ve had it installed for about two months now. It’s been really solid, I’m very happy with this top mount top Mount CFS Lite V3 For SparkX I7 With Spool Holder Mount https://m.crealitycloud.com/en/model

I just bought this printer and I have a Sovol SV06 plus from when it first released. The SV06 is a similar price (new) on sovols website and I think it's way better value if you're okay with a ton of tinkering. Bigger bed, more rigid motion system, higher max temps, has a filament run out sensor, be

I think the Hi is a bit higher spec in some ways. The Hi has got closed loop X and Y stepper motors. The Z height on the Hi is higher also, this might matter to some. The Hi also has dual independent Z axis motors, and it does alignment every print. There's less detail about Sparkx i7 at the moment,

Ich hab letztes Jahr mit nem creality k1c begonnen. Out of the box direkt super Ergebnisse ohne viel basteln zu müssen. Nur schade, dass er nur durch ein Upgrade mehrfarbfähig wird. Auf das gebastel hab ich allerdings keine Lust. Hab dann zum release nen sparkx i7 gekauft und bin von dem ebenso bege

Its not possible to recommend a model without knowing how you will use the printer. The CC2 is the only enclosed model in the group, it will be much better for printing ABS, ASA, PA. Will be limited to 4 colors. Design is based on the CC, so has a decent amount of real world experience for most of t

It's a mixed bag. On paper the Sparkx i7 does have a lot of advantages over the A1. Larger build area, usable camera (60fps), open source klipper firmware, etc.. The issues with Creality printers in general is they have a poor out of box experience. A lot of users experience QA issues that have to b

I have heard that the Creality SparkX i7 is much better than the Hi. And the Anycubic Kobra X is vastly superior. If you don't care about multicolor, Elegoo Centauri Carbon is a good choice for this price range.

currently have a SparkX i7 with a bit over 100 hours on it already and honestly it has been surprisingly solid so far. No failed prints, no major issues, no constant tweaking. For a beginner I’d still say the regular A1 is probably the safest mainstream recommendation right now, but I also wouldn’t