E1 Pro

I just use the built-in person detection on my cheap Reolink E1 Pro webcam and it never seems to make a mistake.

So I have 5 cameras and a NVR (Network Video Recorder, essentially a 2TB hard drive for the cameras). 4 of the cameras are hardwired to the NVR with POE ethernet and have pan and tilt autotracking, the doorbell uses WiFi and is stationary. I have about a week of 24x7 video storage in 4K and then eac

I have two Reolink E1 (Zoom and Pro), Eufy wifi floodlight PTZ, and a Amcrest Wifi Doorbell. Some are super stable, some are not. I have Unifi U6 APs with nothing under -60Db, my wifi is rock solid. Some of the wired cameras are not stable too. The problem doesn't split on the wifi/wired divide

I only use reolink cameras with Frigate and they are all rock solid. I have the poe doorbell, two elite pro floodlight poe cameras, and a wifi E1 pro. I use rtsp for all of them, and restream the native streams via go2rtc to reduce connections to the camera and decode h265 --> h264. Note i run friga

Since it is not critical thing, you could get by with a wi-fi plugged in camera. Get a reolink wi-fi model, use Wi-Fi 5 or 6 with it, get a microSD and that's pretty much it. Maybe Reolink E1 Pro or E1 zoom if you want something a bit better and a bit more reliable. Wi-Fi cameras are not reliable (o

Well, I totaly forgot to get back to you on this. My final config after trying several options and iterations is below I turned everything off on the actual reolink cameras as mentioned earlier. It's been running mostly smoothly, occaisonal hicups, but nothing that really matters. Jusy to confirm, I