Q2 Combo

I have had my Q2 for a little over 2 months and over 200 hours printing on it. Mostly multi color with the qidibox and have only had one part in a multi part print fail because it didn’t stick to the plate so it is probably partially my fault. This is also my first 3d printer and first time using 3d

They both are excellent printers. I had the same goals- targeting specifically the higher end/higher temp engineering filaments and at the time the Qidi Plus 4 was the best option hands down. It has been a unbeleivably good printer to that end. It virtually eliminated the entire learning curve for h

Coming from the Anycubic Kobra S1 Combo (my first ever 3D printer) i only have problems cause of the awful Bed. Its currently on Sale and im looking for an alternativ with which i can Print ABS, PLA and PETG. ABS for Car Stuff. Sometimes Multicolor but i have the Snapmaker U1 for that. I am torn bet

Consider your REAL budget, as well as the size of things you intend to print. PLA and PETG are relatively easy but going beyond those an enclosure can be beneficial along with filters and/or ventilation. A majority of the mid-range printers (I would go with a CoreXY printer over a bed-slinger today

I like to build model cars. I’m also gonna be building things for My Home Lab as well as other physics base projects and also electrical engineering projects. This seems to set the expectation that you will want to use a wide range of filaments, not just PLA and PETG. Consider fully enclosed printer

I’ve had several brands of printers over the last 10 years. I’m currently running Creality, Bambu, and Qidi. It sounds like you are leaning toward Bambu. If you do go that direction, I’d advise the P1S over the A1 because the CoreXY technology allows for more precision, especially on taller prints.