Q2C

Haha, ich war mir nicht im Klaren, dass mein Qidi Q2c unzuverlässig oder gar kompliziert zu benutzen wäre. Bei dem muss ich nicht in den Lan-Modus wechseln, damit meine Daten nicht durchs Internet fliegen. Ich hab Zugriff aufs darunterliegende Klipper und kann viele Dinge manuell einstellen - oder e

Daquilo que eu vi a Q2C no geral é melhor e tem o AMS, mas também é mais cara e vi que têm se queixado com problemas de software e inconsistência. A elegoo CC é tipo Toyota quase não vais ter problemas com ela e a Q2C é um BMW, 😂 acho que é a melhor comparação que posso fazer, ou seja, resumindo e c

None of the CC line are really open source, even CC1. They posted code but its not in a state that can be compiled because of the closed libraries and proprietary compiler used. Opencentauri is patched official firmware for the time being. The CC2 firmware is quite different and no alternative exist

Die Frage ist, was du drucken willst und wie groß. Und ob du mehrfarbig drucken willst. Der Kobra X ist ein Bettschubser, offen. Braucht wegen des sich vor und zurück bewegenden Bettes mehr Platz in der Tiefe. Kein Gehäuse, also sind bestimmte Materialien schwierig oder gar nicht druckbar (ASA/ABS w

Seconding the P1S over CC, 8its a tried and true platform and there are so many times with the CC I dread waiting for parts to take 2 weeks to come or I really feel the little things that just don't work very well like they do on the X1/P1. You could also look at the Qidi Q2C if you want support for

This is a much better option than the CC. Q2C is also an option for only 400 and can be upgraded with a chammber heater cheaply later from Qidi. Nonstructural heatbreak, capability to run real klipper, much less damage prone cable, full online parts store, better homing. CC is really not worth it fo

Kommt drauf an, was du machen willst und welchen Zweck der Drucker erfüllen soll. Du könntest dir - wenn du einen Bettschubser willst, den bald erscheinenden Kobra X von Anycubic mal anschauen: Anycubic Kobra X 3D-Drucker: Ultimativer Mehrfarbendruck Oder den Qidi Q2 bzw Q2c, wenn du keine Webcam un

Does yours look like this? I think it was an original config - mine mounts on the right side and vertically. I think QIDI changed it from this to what I got, and this would actually work better - just add the 4 tube support section(s) in the first link below. Here's what I used for the horizontal su

It's a good printer, has Klipper as its core OS (so you can edit a lot in there, like improving the webcam). The printer prints fine, the Qidi Box is a bit loud and filament switch is a bit slow, but it's ok. You should - maybe - invest in a new bed plate at some point (https://de.aliexpress.com/ite

Hi, gar keine schlechte Auswahl, die du da an möglichen Kandidaten getroffen hast. Flashforge (beide): Die sind gut und zuverlässig und man liest hier im Sub eigentlich nur gutes, von einer sache abgesehen: Sie sind laut. Sehr laut. Wenn du die Kiste aber in den Keller stellst, ist das eventuell kei