Max4

That’s a lot of printers lol. like others have said buying the plus 4 is redundant if you already have a Q2 and max4. I say this as a Plus4 owner for over a year w/QIDI box. For me I had to also add the beacon and tinker with a bunch of other stuff to get higher quality prints. If anything, skip the

I recently acquired a used plus 4 that had the Qidi box with it. The guy couldn’t get it to work. He said the Qidi box needed tinkering etc. I got the Qidi plus 4 with 3 new plates, and a few spare parts along with Qidi box and 8-9kg Qidi branded abs for $200. I wanted to tinker and learn more about

Yeah, I wouldn't buy an X-max 3 at this point. They are well built printers, but the firmware is multiple years behind and QIDI has no plans of updating it. I personally am putting FreeDi on my Q1, Max3 and Plus4, and will check back in on the Max4 in a years' time. And to that end, I'd wait for at

Agreed. With the exception of bed leveling, my plus 4 has been performing beautifully. It's a capable and reliable workhorse now that I have the beacon installed. I'm actually surprised that they haven't upgraded the plus 4 to the Eddy current sensor on the Q2 and Max4. Want to know what doesn't wor

All good comments and I have the Q2, but not the MAX4. I also have the QIDI box installed and the only caveat for me is that it takes two minutes 50 seconds to change a filament. That means for multicolor it’s mostly useless unless you’re only changing colors a couple of times on the model. My Prusa

Actually, incredibly well!! I continue to use my plus4 with qidi box. Its working well, but I have to say, there is such a contrast with the BbL H2C. The AMS2 Pro is so much more reliable and professional. The qidi box clicks and bangs a lot. Sometimes I think its jammed or broken but it works. I tr

Your vendetta is palpable, and you’re just wrong. Show me on the doll where they hurt you. I’ve had long-term use of printers from Qidi and Creality where I wish you were correct. Qidi continues dropping turds to this day, and literally just dropped the Max 4 - and it doesn’t work. Even shill review

All good questions! So far, I believe there's 3-4 users out there who have had good results. Temp readings taken at 60c 80c & 100c. 100c readings taken with & without chamber set to 65c since those are predominantly the temps people print at. Significant reductions at 65c chmbr with peizos experienc

I can get my STC to within :02 from all 8 points. Set Orca Adaptive Bed Mesh before the print, the purge line is always perfect (how can I set my actual print to print with the parameters of the purge line?) then most of the time I get maybe 10-15 meters of fine line print, then it decides to leave

I think the problem of early adoption is that you can end up with junk. Everybody saw it coming though. Review videos for Q2 all said the product wasn't ready. The issue here is that Qidi abandons their products after 3 months, and that in that 3 months timeframe they didn't even have the time to ac