MK4S

Had the same issue on my C1L with the excessive blobs on wipe towers. I manged to improve this a lot, but it's still not perfect and requires more tinkering. I suggest checking the following things: - Check Printers>>Single extruder MM setup>>Extra loading distance and filament parking position and

As a XL owner, im sad that they did not release a XL+ performance upgrade to fix issues and improve performance. Also I'm a little disappointed that it's so hard to track subtle improvements as there is no obvious revision list. I have tried to track the printable repository for printed parts and up

Actually imho the best way to ugrade the mk3s+ is using a Prusa Minis Buddyboard and Snake-Firmware from Github. Its called "mk3.3". It miss powerloss Recovery, MMU suport, NFC and crashdetection, but comes with a much lower price. The board itself is about 45€ at Prusa. The display, while about 100

I had alignment problems with the outer frame as well. What worked for me was to loosen that entire corner. Align the frame and tighten them down. But seriously, that needs to be fixed. Should not have to deal with that. I have built a MK3S, MK4S x2, Original Enclosure x2, and MMU3 x2. Technically x

Well room humidity dry. 30%-40% stored in a original bag with silicagel. But was open for a while (weeks - months) Will check the layer height I was using a standard profile and it was terrible so I slowed down the print and made the 2wall branch diameter smaller so I get more sturdy branches. Every

Neben dem Verbessern der eigenen Fähigkeiten würde ich auch gerne den Drucker erweitern bzw verbessern. Derzeit steht das gute Stück auf 2 lose aufeinandergestellten Lack-Tischen von Ikea (die gute Qualität für 9 Euro) und ist laut, wackelig und eher ein Provisorium. Demnach: Suche kompakten Aufstel