MG63

none will. MG75v2 does not use spark link but more like clone (or could be even stolen) spark link Gemini solution, and it performs as good as/better than the real Gemini solution. It uses the same hardware and maybe even very similar firmware but it isn't made by spark link.It uses the same solutio

I actually think you have a very fair point, I myself in no way prefer IROK's driver over sparklink's one, especially sparklink's twin star driver is really good in terms of looks and functionality. 480 one is fine too.I don't know why IROK cannot get the firmware right, I have the MG63 as well and

around $100?In terms of hardware it's IROK MG63 however it has shit firmware You can try building an AE64 Pro at that price, that should be the best otherwise stick to AE68 Pro.Whichever fits in your budget, but if you can get an AE64Pro then get that. Skip A80RTSkip Neon75HE (only the HE+ wired was

mira yo no compraria mg63, tiene muchisimos problemas de firmware, si queres algo del estilo podes comprar cualquiera de irok menos el mg63 jajaja (no compres en goldgaming)

both use same hardware and you are comparing a pcb with a keyboard so it's not really an appropriate comparison but I would go with ST63 mainly because it's really cheap ( 400cny = 60$ ) and offers insane value. The case in ST63 is of good quality. The only thing I would change in ST63 would be it's

My unit is perfectly fine and the keyboard performed really well on laobaozi's testing, but a person did report that his unit has latency issues. MG75 v2 doesn't use sparklink and supposedly uses IROK's own solution. The MG63 had deadzone issues in the firmware so I won't be shocked if MG75 v2 has s

In my original comment I actually meant a clone of twin star .I can say with 100% certainty that it's not in house, because the same solution is used by Keyverse ST63, and yes that solution used by IROK and Keyverse is pretty much a clone of twin star (in terms of hardware, I haven't checked if twin

both MG75v2 and ST63 use the same solution, MG75v2 has coated PCB which prevents it from water damage and it seems pretty effective based on the video on bilibili.MG75v2 is also a great buy in my opinion, top tier twin star level performance with an alu case, and good sounding switches. It doesn't h

I also do not understand what's the trend with HE keyboards coming with translucent keycaps, in my opinion they look and feel ass. Both IROK and Keyverse claim it's "in house" solution I think that's BS, both are using the exact same solution, in fact IROK MG63's firmware is over 70% exactly the sam

se supone que el irok mg75v2 utiliza doble mcu al igual que el RA68. tengo un irok mg63 doble mcu pero el polling rate se queda en 250hz, lo tengo configurado en 8k pero no funciona