GL-AR300M16 Mini

You need your Wireguard UDP packets to fit inside the Ethernet packet, or the UDP packets fragment, and depending on the network, can be dropped on the floor. On the AR300M, try dropping your MTU in your Wireguard config file down to 1280. If that works, you can try stepping it up, but I normally ju

I purchased my first GL iNet router in 2019. Firmware inconsistency across their line of routers, along with poor QA, has been the norm for me with their products. I have basically given up on using their stock firmware. Hardware-wise, though, they have been great. My first device, an AR300M, is sti

I own multiple older GL iNet routers including AR300M, AR300M16, AR750 and AR750S. In my testing of the 4.x firmware on any of these routers, I found them much more sluggish and flaky than when I run GL iNet 3.x firmware or OpenWrt firmware on the same routers. I do not think it is due to using up a

Tailscale images are huge, and probably will not fit on the M16 version, especially if you are using the GL iNet 4.x firmware, which has very little free space. You may have a chance of getting Tailscale and generic OpenWRT to fit on an M16, especially if you can find one of the reduced size version

I have 300 up 300 down connection in LA. I have a feeling I'm being bottlenecked by the weak gl I net hardware. I'll order brume 2 and beryl ax and try that. 50 Mbps is good enough for me but now I'm only getting 0.2-2mbps with ar300m and opal