Flint 2

Yea Verizon's recent default top end routers are actually crazy powerful and capable for all in one units. Hell, they even beat a lot of prosumer offerings from other brands, and in raw top-end performance they even stomp out Ubiquiti's Dream Router 7 and the Flint 2 and 3 from GL.iNet. Only way to

Thanks. I’m using GL.iNet’s built-in WireGuard server/client setup with QR import, so I didn’t manually duplicate configs. The client profile was generated directly from the Flint 2 server and imported into the Beryl. The main issue is the Beryl VPN dashboard stays stuck on “Connecting…” and interne

Your unloaded and upload are both pretty good, but your download could stand to improve. I’m on a similar internet “speed” tier as you (speed vs bandwidth can be deceiving). I have a Flint2 router that I flashed with vanilla OpenWRT. With that, you could install CAKE and SQM. You’d likely want to sh

Upgraded my Flint 2 (MT6000) to 4.8.4 and immediately noticed a Wi-Fi regression with the exact same setup, placement, and clients. What changed for me: lower coverage weaker signal / RSSI worse performance through walls and between floors spots that were usable before became unstable or borderline

The unbricking process is unreliable. Booting into u-boot requires a lot of patience and luck. I have had to do this probably 30 times or more, so it does work, but I am on pins and needles until it finishes. I've had to repeat the process up to 5 or 6 different time to get it to accept the .bin. My

All of the „Flints“ ship with „Openwrt“, just that they all are with „GL.iNet“ flavour+closed source drivers. In short, most purists on here and the forums shout that it isn't „Openwrt“, because it uses closed source software/drivers, but compared to other vendors, „GL.iNet“ allows full stock roster

Below is my setup. Please forgive the use of AI to organize the data haha I wanted to make sure it was clear. ISP: OEC Fiber (Oklahoma City area) Plan: 1 Gbps fiber Typical speeds: 700-800 Mbps up/down ONT/Router: Calix 844G-1 (all-in-one) Router: GL.iNet Flint 2 connected via Ethernet to a LAN port

I seem to recall it's reasonably well documented on the GL.iNet forms - by GL.inet themselves - that most/all routers by default destined for Europe ship with a DE country code. Certainly Flint 2. I had a Flint 1 from UK Amazon, that shipped with US. ... if Flint 2 is now correct levels for DE, it's

it's available as of April 21st... running firmware v4.9 beta on my Beryl AX takes a lot of memory, +80% just my Adguard Home and no dpi. went back to the stable release, v4.8.1.. DPI in GL-net routers could be useful. but for those with lower ram, stability is the priority. I guess that's why DPI w

I'm having this same issue. Did you figure what happened? I upgraded from a Linksys EA6350 to a GL iNet Beryl 6 (oops, I meant Beryl AX) I found cheap on marketplace and speeds were fine. I'm paying for and receiving 300/300 over Verizon FiOS using both routers. I upgraded to the Flint2 hoping to ha