Neptune 4 Plus

A lot of people recommend the ender and I've only had unending issues with it. This is coming from someone who is not new to printers. I think Creality has loosened quality control on the budget line and there's better beginner options with more up to date quality of life features if you are willing

Dein Druckbett ist wahrscheinlich uneben. Das hatte ich bei meinem Elegoo Neptune 4 Plus auch. Hier ist, was ich dir empfehlen würde: Tausche die Federn an den Schrauben zur Druckbett-Nivellierung gegen Gummipuffer aus. Verbinde den Drucker per LAN mit dem PC, damit du auf die Klipper-Oberfläche zug

1 printer is enough for me, so I don’t got down the rabbit hole. I recommend you go for bambu a1 mini for some one who don’t need hustle of tinkering I have elegoo neptune 4 plus the main downside is the spare part limited and bigger size for bed calibration. Example useful i had printed pegboard an

Hey u/thepartyfoulchicago , Veteran Neptune 4 Max Owner and recent owner of the Centauri Carbon 2 with experience on the CC1, They're both fantastic printers. The possibilities are endless for both machines but in my opinion its a steeper learning curve for the 4 Max since you need to do one extra s

Ok gotcha - this is very helpful. So I'm going to toss it out there, I came from Cura in the past (i think it was the Elegoo 5.6 i used to use) and I couldn't get it to work consistently which prompted me to try out other slicers. For a long while I used Orca and then Elegoo made their own version o

I bought Elegoo Neptune 4 plus, used PETG, halfway considering doing a post on it, since a lot of scraps from the time a print got messed up and stuck itself to the magnetic plate on the hotbed and were melted in, I'm an Engineering student and the only thing I had to do was to clean the nozzle by..

Me iba a ir por una flashforge a5m pro pero me decidi por una elegoo neptune 4 plus que es mucho mas grande, casi el doble. Quiero algo mas versatil, la ad5m pro no se por que la veo muy justa en cuanto a cama de impresion

[screws_tilt_adjust] screw1: 59.69, 40.45 screw1_name: left front screw2: 59.69, 175.45 screw2_name: left middle screw3: 59.69, 280.45 screw3_name: left back screw4: 314.69, 40.45 screw4_name: front right screw5: 314.69, 175.45 screw5_name: right middle screw6: 314.69, 280.45 screw6_name: right back speed:

I can back elegoo :) I have the Neptune 4 plus and it's been so reliable and easy to work with. The biggest issue I had was the build plate getting oils on it because I wasn't aware my cat was walking on it 🤣 easily solved with a good wash with dish soap lol

Hey u/rEvolutionTU , Just wanted to chime in on my CC2 experience. I've been with Elegoo for 3.5 years, owning a Neptune 4 Plus and Neptune 4 Max before adding the CC2 to my arsenal. The "bed slinger" printers can be a little more involved than your run of the mill set it and forget it type and the