Neptune 4 Max

Max bed temp on a neptune 4 max is 85c, im shocked you are even getting it up to 100c. Not to mention you need an enclosure and you want the chamber temp to be about 45-50c.

Hey dude - 1st, chill out, you're on the internet and people who are asking real questions are getting real answers from real people like myself. Believe whatever you'd like but I don't use AI or bots to come up with my answers, I simply answered from a mobile device and yes - there can be issues in

I own one. Out of the following brands ive bought. Bambu, flsun, elegoo, anycubic, and sovol. Sovol is the 2nd best imo. It does have vfas though. Im not a huge tuner and cant tell you if it van be tuned out easily. But part quality pit of the box is pretty good. This is compared to an elegoo neptun

The Max are pretty rough, I’ve tested like 4 of them. The smaller ones may be ok but you might need to tinker with it. I’m currently using the Neptune 4 Max (ELEGOO replace my N3 max with an n4 max) and there’s like a whole website dedicated to tinkering with it out of the box (neptune4.help) I’ve a

I use vision minner nano polymer. Goes on like water and drugs instantly leaves no mark on your print and where you put it off your printing pla you can print there a crap load of times without reapplying. When you print huge crap on sv08 max and Neptune 4 max the second one do not buy the Neptune s

All printers require some initial assembly and setup. The issue with the Neptune series is that they are antiquated. You have to manually calibrate several settings (many of which change if you move the machine, switch build plates, switch filaments, etc.) that are automatically calibrated on the CC

I've got a Neptune 4 max that I bought and elegoo never got to work right. It's not collecting dust and was replaced by my Max.

95% of them yes. Of the 288 tiles about 24 of them are printed in Elegoo PETG Plus from an FDM printer. The other 244 are all in Elegoo ABS 3.0 Grey resin. I have a saturn 4 ultra 16k and could run off a batch of 7 tiles in about 5 hours. The FDM printer I could do about 20 at a time with the neptun

What Default settings would you recommend? Im using Elegoo slicer and printing PLA on my Neptune 4 max. If I Pick a Default settings do I have to do the calibrations? And Most importantly what Speed would you recommend? At the beginning I Had Like the Standard setting and my Prints would habe very B

Ho la elegoo neptune 4 max. Acquisto peggiore della mka vita a livello di 3d. Il firmware è una merda, ma talmente una merda che nel manuale ti scrivono "abbiamo fatto tutto di merda, aggiorna il firmware appena puoi". Bubble of doom, clog, z offset alla cavolo di cane. Peró mi serviva una stampante