L10s Ultra

Mova P50 Ultra. Gibt diverse Modelle und viel tut sich da nicht. Gibt zwei große Player (Dreame & Roborock) mit ihren Firmen Konglomerat. Mova gehört zu Dreame und hat bspw. exakt die gleiche App nur mit anderen Branding. Hatten davor den Dreame L10s Ultra Gen 2, da hat aber nach ca. 8 Monaten die S

just warning, as per my newest post on here - do not change router or wifi password there's a risk with some 2nd gen hoovers that they will stop working and connecting to the new network. https://www.reddit.com/r/Dreame_Tech/comments/1p7754u/warning_l10s_ultra_2nd_gen_model_is_broken_and/

all robots that run with the valetudo project here is the list of supported models https://valetudo.cloud/pages/general/supported-robots.html I personally run a roborock s5 (since probably a decade now) and several dreamy L10s ultra careful with dreame, they are really good at selling a crap model w

My previous Dreame robot (L10s Ultra) was this, worked quite ok at the start but ended up horrible after a year or so of continuous use in a big home. It was an amazon refurbished unit that was refunded through the 2-year warranty so I left it at that. Now my brand new X40 is performing quite well a

dreame l10s pro ultra is unreliable and doesn’t do a good job mopping the floors. We always have to mop after the machine has finished. It sometimes just doesn’t work and it completely stopped working after 18 months. Totally useless. Don’t buy a Dreame product.

On the L10s Ultra, a loud high-pitched squeak like that usually comes from one of three places: • Drive wheel bearing – Even if you wiped the wheels, the internal bearing can dry out or get grit inside. The noise often gets louder when turning or changing speed.• Main brush motor shaft – Hair + fine

This is a known failure pattern on the L10s Ultra base. Inside the base station there’s a small spring-loaded valve that’s supposed to stay closed unless the pump is actively moving water. Over time, scale or residue prevents that valve from sealing properly. When that happens, water slowly leaks ou

On the Gen 2, the front wheel is not clip-in like older Dreame models. The wheel shaft is captive inside a housing that’s installed from inside the robot. That’s why it won’t pry out no matter what you do. To replace just the wheel, you’d have to open the entire robot (top cover, internal frame, wir

Sounds like the classic L10s Ultra “squeal while mopping” issue. It’s almost always the pump or the internal valve stuttering under load, especially if the noise only shows up when the pads are being fed water. Cleaning pads, draining tanks, descaling… those won’t fix it when the hardware is already

The only thing I can add from the Dreame side is that this isn’t a universal L10s Ultra problem, it’s a batch-specific fault tied to the cloud registration chip. Most units never see it, but the ones that do need a one-time re-registration at a service center because the chip basically “locks” itsel