Ender 3

To be fair, you have to have a very high IQ to understand the Creality Enders 3V2. The firmware is extremely subtle, and without a solid grasp of theoretical physics most of the features will go over a typical Bambu owner's head. There's also the Enders nihilistic outlook, which is deftly woven into

First step is to look up the pricing of a Bambu Lab A1 in your local currency. IMO, the target cost should be 50% of that or less (preferably much less). It's not 2019 any more and we're not competing against wildly overpriced Prusa MK3's. The amount of printer and ecosystem $300 buys these days is

So I just went through hell diagnosing my printer for this exact issue. The blobs are caused by the pauses, the nozzle melts the filament and creates the blob. On the ender 3v2 at least the fan that cools the mainboard is shared PWM with the parts cooling fan. Absurd design. Terrible. I had turned o

Check the extruder - stock E3v2's came with a plastic unit that was prone to cracking at the hinge where it's hard to spot. There are metal clones of the stock extruder but it's a design from the dawn of time and there are better options that don't cost much in the modern world. Also check the tip o

Is it worth trying to fix an old Ender 3? That is the $300 currency unit question. IMO it's worth it if you want to deep dive into the nitty gritty of printing like it's 1899 and learn enough that DIYing a Voron or Ratrig (or whatever) is not a problem. If you just want to print stuff and learn the

u/Malow is right - time and money can get these things running quite well, even by modern standards. First step is to look up the pricing of a Bambu Lab A1 in your local currency. IMO, the target cost should be 50% of that or less (preferably much less). It's not 2019 any more and we're not competin

Creality firmware sucks. It was old when it was new, lots of nice-to-have options were hidden or outright disabled and they've ignored years of development since. Marlin has come a very long way in the 4? 5? years since Crapality wrote off these machines. Especially for bed meshing, it's night and d

Yep. For future reference: that's a BIQU toolhead although I'm not sure what model. https://biqu.equipment/products/biqu-h2-v2s-extruder-for-b1-bx-ender-3-3-v2-5-6-cr6-10 It will need quite different firmware settings to a stock setup: X-Y offsets, esteps (932/mm) and Z-offset. You'll want to work y

Depende muito do tipo de filamento que queres imprimir. Trabalhei muito tempo com uma Ender3 pro, depois disso comprei uma K2 plus (pelo tamanho e pela câmara aquecida para imprimir ABS) e agora comprei um uma H2S. Se não quer se incomodar, vai de bambulab, a experiência é muito "refinada" comparand

From what I know, you can’t connect CFS to the Ender 3 V3 KE because it’s closed source. If you want multicolor printing, you can buy the co print kcm set, but I should warn you,it’s not plug & play. You’ll need a lot of trial and error to get it working properly. From what I know, their support isn