Ender 3 V3 SE

I have also about 400 hours, comming straight from ender 3 v3 se. My recomendation is If you dont do 100% build plate prints, grab cryo grip plate. I havent found 100 % compatible with CC, but generis ones are covering 99% of my bed. Prints are greatly sticking to it, never had to use any glue or ev

In general, I don't think clogging is related to the brand of filament. I don't know how well your Ender 3 V3 SE's hotend performs, but I noticed that the stock hotend on my Ender 3 V2 quickly reached its limits in terms of volumetric flow, especially at higher speeds or with thicker nozzles.

That's... Somebody has found a way for the Ender 3 V3 SE to have multicolor coughCo-Printcough... that said... You're by far better off to buy a new machine for what you want. The SE is ancient by state-of-the-art standards. There are TONS of options on the market for 4-color multi-color for $400 or

Yes, I had a Ender 3 v3 se with a coprint attacked to it, with a enclosed chamber and camera. I got it setup, and it just gave me issue after issue. Then I sold it for $400 on Facebook market place a bought a p1s. Greatest thing I ever did.

I can't comment on any of the others, but as far as Creality, I have owned: Ender 3 Pro, Ender 3 V2, Ender 3 S1 and S1 Pro, Ender 3 V3 KE and SE, K1, K1C, Ender 3 V3, Creality HI, and now the K2 Plus. Clearly I am a fan of Creality, but with this, I have to say, the two worst printers I have ever ow

Mal ahí amigo, mi anterior impresora era una ender 3 v3 se. Imprime 10 veces más lento que la bambu a1 (o incluso más lento) y la cama se hizo percha incluso siendo magnética, la tengo agarrando polvo por que no quiero luchar más con esa.

Does klipper make that big a difference? With the default settings for the ender 3 v3 se in orca I am getting horrible layer shifting on the y axis. I have to dial back both the speeds and acceleration like 40% so I'm wondering if there is something wrong with my printer

siim, desisti da SE e agora a meta é a velocidade maior e o Wi-Fi mesmo. só que agora caí em outro buraco hahah: estou na dúvida entre ir de Ender 3 V3 KE (pelo Klipper aberto e preço menor) ou se já estico a corda até o limite e pego a Bambu Lab A1 por conta da estabilidade e a possibilidade de um

I'm sorry, but you're running a Marlin machine. This firmware is ancient by state of the art standards, and caps out at 150-200mm per second movement under the absolute best circumstances. Most often, you're going to be doing good to run half that. There are optimizations you can do, but they are un

Absolutely yes. I got an ender 3 v3 se as my first printer and got sick of constantly wasting time and money (for filament) on calibrations every time to weather changed. Got an A1 instead and it is a laughable difference, you won’t regret it. Although at the current price points, if you can stretch