Ender-3 V3 KE

Here’s a list. I wish there was a pinned area with all of these. You probably want to get one of these since it helps with the blob of death issue. https://store.micro-swiss.com/products/micro-swiss-flowtech-hotend-for-creality-ender-3-v3-ke Here’s a collection of printable mods. https://m.crealityc

Fair questions but the difference in price (at least from a US perspective, $100 extra for an $800 printer vs $700) justifies ignoring whether you really need the second nozzle because at some point you'll likely regret not buying it after discovering that it might have come in handy for a little bi

No,the early Ender 3 series uses MK8 nozzles with a (5 mm) M6 thread,you can get them in a variety of materials, the most common ones being brass and hardened steel,but you can also get nickle plated brass and bi-metal versions of this nozzle type. The Ender 3 V3 KE uses K1-style (Volcano-style) noz

Next time it comes apart think about installing this, it pretty much eliminates the blob issues between the PTFE tube and yoke. It is a night and day difference. Creality Ender 3 V3 SE Hotend, Ender 3 V3 KE Ceramic Heating Block Kit with Quick-swap Nozzle, Upgrade Hotend Kit 300℃ High Temperature 60

It's really hard to break these machines beyond being fixable. If the isolation on the wires for the fan looks compromised so I'd use solder and heat shrink to splice in new wires but you could also replace the fan if you don't feel comfortable soldering. Just make sure it's 24v and has the correct

This is one of the most frustrating issues I’ve experienced with my Ender 3 V3 KE. The first time it happened, I completely disassembled the hotend. I removed enough screws to take off the entire nozzle and heatsink. I initially tried to salvage the nozzle by burning off the plastic, but that only c

The Creality ender 3 v3 ke is my first printer and I have never had major problems with it. lately I have a issue with the heating of the nozzle, it just heats allot more then needed and then it says nozzle didn't heat as expected

Si amigo pero enfócate ennque sea el kit completo y no sola la pieza o solocla boquilla debe decir kit de actualización para ender 3 v3 ke Y la verdad es un cambio enorme y super comodo ya si viene con un calentador de cerámica buenísimo que reduce los tiempos de calentado y enfriado ademas que al s

I ended up typing it wrong, I have an Ender 3 v3 KE. These are the temperatures I tried, and I've had good results with them. My filament is National brand.https://www.lojanational3d.com.br/

I highly recommend a Microswiss Heatsink ONLY, not the hotend kit.What has happened is the material where the hotend screw mounts is too thin and the screw has stripped out the threads. Bad design.The Microswiss Heatsink only is a nice beefy heatsink and this will not happen.I would also get a spare