GT-AX11000

I tried your suggestions in the edit on my Asus GT-AX11000 and still can’t get it to connect. Meanwhile the speeds for my Switch 2 on the 2.4Ghz network are atrocious. Everything else in my house is working great including devices on the 2.4 network. This is so frustrating and has to be an issue wit

I will try again this week, first time, they didn't want to help and said to use their equipment, it will works fine with. ( I'm using fiber media converter MC220L with my asus gt-ax11000) I call them back with their router Valerie anc they tried the basic things and suggest to replace the Valerie.

Same issue on an asus gt-ax11000 with 17 pro max. About the time I notice things getting slow and failing to load it very quickly degrades further to not working at all. Full WiFi bars, everything shows connected. Other WiFi devices are fine. Old iPhone 14 Pro works fine on iOS 26. I think I had thi

I don’t have a comparison between the two. I’ve had the Asus setup since before I had Starlink. It’s a ~2020 WiFi 6 System using a GT-AX11000 with some RT-AX92Us as satellites that was cobbled together with Asus AI-Mesh protocol (not a specific mesh kit, just allows some of their higher end routers

I am also unable to use the app or browse MySubaru.com from my metronet connection. I am using an Asus GT-AX11000 router. I am able to access the app and site over Verizon cellular connection.

Yeah, I actually ran into something really similar—IP address conflicts combined with ARP cache mixups. Devices would randomly lose specific types of connections (like TCP or UDP), or drop off entirely and behave like they were still connected to Wi-Fi but had no internet. I used ChatGPT to help dia

I have this and wouldn’t reco it for dual wan. Software yung load balancing so your speeds get halved. Like if you have 500Mbps for both ISPs, turning on dual WAN brings your usable speed to 250. And apaka unreliable. Mas ok yung failover nya but pain pa din. Ang good thing lang siguro nito is wifi6

I’m having the same issue. All of a sudden HomeBase 3 stopped working on WiFi. I got a replacement and the same problem. I have GT-AX11000 and I followed what you suggested: created guest network for IoT devices Disabled WiFi 6 for 2.4GHz networks Disabled Agile Multiband Still when I remove the Eth

Just an update... We wound up using the GT-AXE16000 as the main router and hooked up the GT-AX11000 as a node using an ethernet backhaul. When we were using just the GT-AX11000, we seemed to have lots of problems. Especially with devices that were further away from the router. But also tons of misce

Asus GT-AX11000 router capable of vpn server and split tunnelling and 3x Asus RT-AX92 mesh routers all hardwired; I honestly would be surprised if it can’t handle the traffic and a broadband speed of 500mb Without Nord I can pull 520mb download speed and with Nord it’s 190mb