Kobra S1 Combo

100% Regret! Had an Anycubic i3 Mega since 2017. Replaced the hot end twice, other than that zero issues. The power supply finally died back in September. Based on prior experience, I thought it was a no brainer to buy a Kobra S1 combo. I printed the test benchy and that was it. I had cutter issues,

Jumping in here to echo this. I had 2 Kobra s1 and they were fine for a week. Then they start falling apart, par fan bearings went out on on of the, ace pro filament sensor went out on another, beds were showing signs of warping and couldn’t get a good first layer to save my life. The. Got hit with

Where are you from? Might be different stores. But i see all of them without combo too. The k2 plus is maybe too big and expensive then. I see the k2 pro (non-combo) for 599. On store.creality.com The regular k2 (260mm build plate) for 499 Is there no regular (smaller size) anycubic kobra s1 on thei

Anycubic kobra s1 max looks like what CC will be if they go bigger plate size, its railing system and other corexy design solutions are very alike. However, this will drive cost of printer up, and entering in large format 3d printing league with single nozzle/material system like canvas, does not lo

Im in a similar situation to you, except that I went from a kobra s1 (its still in its box being used as a doorstopper...) to a p2s combo instead. for my p2s, in bambu studio, I can set as auto, on , or off for : flow dynamics calibration, bed levelling, vibration compensation. I cannot turn ai dete

A month ago, one of the people who received the KS1M made a Reddit post asking what we were interested in. We also discuss it a lot on the Anycubic Discord server with beta testers and future users, a server I recommend you join to stay informed or when you need help. The S1M is positioned as a comp

What are you using now? I've had an Anycubic Kobra S1 Combo for like 2 weeks and am already running into hardware issues with the buffer, clogs, extruder, and sensor issues. I am currently engaged with support hoping to get a new sensor ribbon or entire extruder due to a hardware failure. I feel lik

The Anycubic Kobra S1 Combo is okay, but having only one nozzle makes the waste almost not worth it for heavy multi-color prints. My rule of thumb is if there are more than about 50 color changes, I'll use the Snapmaker U1. Before I bought my U1, I printed a very large snorlax with like 1300 color c

I have the same problem too, I have 2 ACE2PRO (one on the S1 and one on the S1MAX), both have problems, see here: https://www.reddit.com/r/AnycubicKobraS1Max/comments/1tc1npp/failed_to_detect_filament_out/ Does the channel LED that jams stay on for you too?

PLA+ 220°C print I'm trying PLA and I have to say that it doesn't actually smell, at least I don't smell it compared to the PLA I was using before unless it could be the 3D printer, which is better than the one I had before. I had an ANYCUBIC KOBRA S1 COMBO before -- the smell was noticeable even th