AirMedic Pro 6 UltraS

A few months ago I bought the Allerair airmedic pro 6 with vocarb filter which is rated to 1200 sqft and has 28 pounds of carbon impregnated with potassium permanganate. The performance is mixed. Placing the air intake on the bottom of the unit is a sub optimal design, it doesn't draw in air efficie

Okay. I know Airpura used to sell wall mounts. However, I don't know if they're compatible with their largest models like the C700 DLX. AllerAir is the other heavyweight sorbent media purifier brand. I don't know if they sell wall mounts for their AirMedic Pro 6 Ultra series purifiers. Be forewarned

Unfortunately the air monitor won't be much help on the VOCs side. PurpleAir (Flex, Zen) or the AirGradient ONE will be good for particulate matter. In consumer-grade AQI monitors, the tVOC (total VOCs) is measured by a metal oxide sensor. tVOC does not identify individual gas species. Metal oxide s

You are correct regarding ventilation. However, AirDoctor does not offer very much activated carbon. These are panel filters containing a few pounds at best. Compare this to higher end offerings such as the Airpura C700 DLX - Chemicals and Gas Abatement Plus Air Purifier (26 lbs. carbon filter canis

Two Smart Air SA600 purifiers would be underpowered for 1,500 sq. ft. Smoke CADR is 265 CFM for one unit, so two units at top speed would have Smoke CADRs of 530 CFM. For an open 1,500 sq. ft. space, minimum particulate CADRs would be 1,000 CFM using the AHAM 2/3 rule. The AllerAir AirMedic Pro 6 se