Q1 Pro

Ok well you have options, there are just pros and cons with all of them. Bambu P1S w/ AMS - Enclosed, fast, will handle most these materials. May need to upgrade extruder if you plan to do filled materials after awhile, it tends to get eaten. Doesn't get super hot in enclosure (thin sheet metal, no

Thanks for the comment! I have an A1 mini but this was done in ASA on my Qidi Q1 Pro. It's a mess. My models are insane and do not print well at all due to so much going on with how they connect to each other. Also it may seem roomy on the video but it's real tight inaide and hard to fit everything

A betont azt szívesen megnézném, mert ha valamiből lehet tartósat alkotni akkor az az. Egyébként PLA lenne, természetesen warhammer 40000 témájú modellekkel. Öcsémmel vettünk egy Qidi Q1 Pro nyomtatót, de a teszt hajóknál többre nem mentünk vele, ugyanis hézagosan nyomtatta a tetőket, a rétegek sem

At a $400 budget, I would recommend the Elegoo Centauri Carbon (CC), or the Qidi Q1 Pro. Three Q1 Pro is a great printer and includes a chamber heater. However, the CC prints equally good quality, and you could add a chamber heater. There are two reasons I recommend the CC over the Q1 Pro: The first

You have to configure input_shaping before setting high accel value. Even my Qidi Q1 pro can't print above 4.5k without sacrificing quality