Max4

For multicolor printing? SnapMaker U1 For functional printing? Qidi Q2, or if you can stretch the budget for a massive printer, Qidi Max4.

Also... du stellst die falschen Fragen, weil du nicht die Eckpunkte richtig definierst: WAS willst du mit dem Drucker drucken? Wie groß willst du drucken? Du bist ITler, du weißt, wie du reagierst, wenn jemand sagt "Ich brauch einen PC, ich hab X Geld". Da fragst auch nach "Office? Gaming? Videobear

I won’t speak to the AGPL issue since that has been discussed at length and I have nothing further to add. But I can say that I currently own an H2C, Qidi Max 4, Qidi Plus 4, and Bambu P1S so I’ll offer my insights on the machines themselves. I can honestly say that the H2C isn’t worth the price in

Depends on your balance of needs with regards to multicolor, size, and materials compatibility. If you intend to do a ton of multicolor printing with four colors or less, then a toolchanger like the Snapmaker U1 or maybe the upcoming Creator 5 is the best value for you. If you intend to print with 8

Errm? It has AC heated bed - almost 1kW heater. It's insulation is shite, but I just described what I do if I want to print ABS... It's the same system which is in X1C for example. I live in Ireland. I heard there is some bright light above, but our sky is gray with sometimes getting whiter. I have

I recently purchased the Qidi Max 4 and it definitely meets all of those requirements at an AMAZING price point! It’s a little less polished than the Bambu ecosystem, but it’s not far off. And while you don’t NEED to tinker with it, there’s also very little stopping you from doing so, unlike Bambu’s

I think the Plus4 after all the issue now is the Qidi printer with the best Print Quality of all qidi printers, and I like the 305 bed side, but if it is not too different from the Max 4, what I think because it have a very large bed, the print qualety may not be that good, but if are the same for t

I would think for cos-play armor, you need build volume over most anything else. So,Sovol SV08max 500x500x500. 1300 with enclosureQidi Max4 claimed 390x390x340, actual is a little smaller like 375x375 but still huge. Pre-order at 1200H2S 340x340x340. 1250 vs 1500 for the combo (get the combo for fil

For the money I would be getting a U1 for multicolor and something like a QIDI Max 4 for the engineering materials/larger prints. It's slightly more money, but infinitely better in multicolor, engineering materials, and you can have both churning out parts at the same time. Plus you don't get screwe

3d printing is inherently weaker than injection molded, so you'll want to be able to use all the engineering materials. I'd look at Qidi: https://us.qidi3d.com/products/max4 Siraya Tech's great for engineering filament that doesn't break the bank: https://www.amazon.com/Siraya-Tech-Fibreheart-Printi