CORE One+

Unfortunately having the same issues and the more I print on the Core One, the more I regret the upgrade from my well printing MK4S to the Core One. Don’t have anything else than the Prusa belt tuner. But obviously all the things you’ve tried ain’t made a difference at all.

Well, I believe that yes, Prusa's quality control has fallen off recently. I haven't had your specific issue, but I've had pretty much every other issue with my CORE One+ printer. The problems have continued since the posts linked above, including some where support has denied that my problem is a p

Not what you are asking for but. It seems like prusa really likes to hold old stock sometimes, I bought my core one a couple of weeks ago and it was a bit of a Frankenstein in parts, the printer was a 2025 model and it came with the 2026 serial number sticker in a bag, and the LCD had a 3D printed b

To all of you having these clicking noises issue - reprint the "main plate" part of nextruder - its the part with that small "funnel" that leads filament into nozzle tube below this funnel. From factory its very very coarse and if end of filament is pointy enough, it often sticks in and its end of s

I know there's some bias just due to the fact that I'm posting this in the bambu sub, but the core one + indx just doesn't work for me atm, I'll copy paste the same response I posted under another comment: true, it swaps a lot faster, except indx (afaik) doesn't start shipping until the end of june,

I don't have a Core one+ but i have a 5th XL and mk3s/mmu2s and sls1. If you want to print basic materials and need the large volume XL its ok. The enclosure is an overpriced dust cover with airholes but somehow manages to overheat my heatbed controller. There are no heat sensors in the enclosure an

By "core XY origin calibration", do you mean the "homing calibration" that clunks around in the front-right corner of the printer? If so, it kinda sounds like you already did some troubleshooting. Definitely make sure your gantry is perfectly square and your belt tensions are in the recommended rang