K2 SE

Uns meses atrás você encontrava a a1 combo por quase 4000, hoje em dia acho que pagar um pouco mais pela creality K2 SE combo ou pegar a Kobra s1 combo vale mais a pena. Outra alternativa é tentar importar usando Grabr.

cara essa é pergunta de um milhão né kkkk. Sim, eu já trabalhei profissionalmente com as duas marcas. A Creality tem uma cultura de custo benefício e é mais open source, deixa o usuário mais livre, a bambu já parte para uma linha Premium de entregar facilidade ao usuário noob, inclusive tirando aces

a1 mini tu vai se limitar muito por conta da mesa pequena, eu ficaria entre fabricantes onde acha mais pecas e comunidade, bambulab e creality pegaria uma a1 normal ou creality HI - a vantagem das k1 k2 seria o coreXY que sao mais precisas

The creality K2 combo is a 260x260x260 build volume printer, lists for $550. Mention just to confirm which model you mean, since Crealilty has a K2 Plus combo, a K2 SE combo, and a K2 Pro combo. Not a cosplay person, but seems like a lot of the Cosplay redditors are considering larger format printer

Another option would be the Creality K2 SE, but more expensive.This is a coupon not every store accepts, so I'm limited to a couple of online stores...

k2 se is the biggest pain in my ass next to my neptune 4 max. cz2768 error codes. bed plate impaling itself into the nozzle and dragging the pei plate warping the bed. having to reflash, quite often to reset it from error codes yea it doesnt have warranty creality sending me parts but. with out Sfw

has someone created any dnd minis with this printer that can share? ai pushes me over bambu p2s and runnter up creality k2 se

This will happen on the K2 SE as well. While Creality is still trying to figure out what small stainless steel retract cutter guide I am talking about I have solved the issue myself. I took an extra nozzle and with a Dremel tool cut 2.5 mm off the top. This piece could be 2.45-2.5 mm long. I did als

My K2 SE just did this last night. It was a fresh start after a completed print. After performing the prerequisite successful auto level pre check when printing started the nozzle dove into the build plate. Waiting for Creality's response. I had this happen in January, I adjusted the z offset from 0