K1 Max

For u/Creality_3D : Your link requires a WeChat login to use. In the US, very very few people have WeChat accounts. I know it's used for damn near everything in China, but it's quite rare in the US. Anyway here is my feedback: I'm a big fan of Creality. I love my K1 Max and I've got a K2 Plus that j

check the bed mesh, it’s probably not level and the probe can only compensate so much. you can print bed shims that will even it out to fix this, i did it on mine and the bed variance went from 1mm to .3mm with much cleaner first layers https://www.printables.com/model/681528-bed-shims-fits-creality

I have collectively 3000 hours on my 3 K2 Plus printers. I print everything from PLA to Nylon. The bed is the Achilles’ heel on these printers. I have one that has a 0.25 variance from the factory, the other 2 were bad, one was 1.2 and the other was I’ve 0.9. I tried a lot of things but finally I us

I got it about a month ago. I upgraded my K1 Max, upgrade went text book. Firmware upgraded correctly. I've re-installed the helper script (I'm a linux admin, so I could work around the issues it was having). I've got moonraker/mail sail installed but currently using creality print because it talks

I run Orcaslicer on my CachyOS with good performance and not any issues except from when i try to go into the device tab in the slicer on my when having my profile set to the Creality K1 Max and the launcher just crashes. but other then that it works great ! :) the only thing i gotta do to get the s

Currently, I've been running a massive project: I've been printing The Castle of the Vampire Lord: a 7ft tall miniature playable reproduction of Castle Ravenloft in D&D. The thing is massive, so much so that I've been running 2 K1maxs around the clock for the past few months. The only thing I'm real

OP - Astronomer has sent you on the right path. I have a K1Max (which came with the hardened 300C nozzle) and I used the built in PA6-CF setting in Creality Print and it printed flawlessly and I had the top glass off. My bed temp was 50c and Nozzle temp 290C and I dried the Filament at 65C overnight

That’s a wild take. I own 27 printers split between Creality K1/K2+/sarmoons & K1max, Bambu H2Cs + one snapmaker U1. My oldest printers from Creality have over 12k hrs. Average for my K series is about 5000hrs, Bambu has the same hrs as the K series & the snapmaker has less than 100hrs since we just

That is a great release, Rocky finally getting a proper printable model is awesome. Should come out really clean on something like the Creality K1 Max if you dial in layer height and supports. Definitely a fun print for fans.

Compra um rolo de ABS de marcas boas importadas como Creality, Elegoo, Bambu, etc. e manda pau na sua K1 Max com tudo fechado. Usa o perfil básico do Creality Print para ABS e pronto. Vai ver que funciona sem problemas. Depois você pode ir comprando marcas mais baratas e obscuras para testar. Eu já