Ender-3 V3 KE

Either you got lemon or you are using the wrong print profiles. I have had my A1 for almost 2 years with over 2k hours on it. It has been far more click than the ender 3v2s ever were and way more reliable with far better print qauilty. This is coming from some who owned 3 v2s and a cr-10 i had those

Looks like he might either be biased or he got broken one? My Q2 has been absolutely exceptional in the 200 hours of printing so far. Haven't had a single print failure with the exception of when I set a wrong filament in the slicer. Definitely light years ahead of the Creality Ender V3 KE I had bef

This is one of the most frustrating issues I’ve experienced with my Ender 3 V3 KE. The first time it happened, I completely disassembled the hotend. I removed enough screws to take off the entire nozzle and heatsink. I initially tried to salvage the nozzle by burning off the plastic, but that only c

The ender 3 v3 ke is a horrific machine in my opinion, I had one for 2 years and even after constant upgrades, such as zbrace, fatburner mod, rails upgrade, basically everything i could put to make it better, and the machine was still not up to par, Made a switch to the bambu lab p1s and havnt havnt

I went from a ender 3 in 2020 to a V3 SE and a V3 KE to a bambu. Creality is alright but not really reliable on leaving the printer unattended. The amount of times I stayed right in front of the printer in the first few layers, and failed printers... And the tweakings...in the end I end up learning

The Creality ender 3 v3 ke is my first printer and I have never had major problems with it. lately I have a issue with the heating of the nozzle, it just heats allot more then needed and then it says nozzle didn't heat as expected

Acho que você foi enganado por algum coach ou esta vendo comparações de youtubers quando a bambu lab a1 era do mesmo preço que as outras antes de eles enganarem esse tanto de otario que esta pagando o preço delas atualmente, quais problemas você ve numa ender 3 v3 KE que não ve em uma bambu lab a1 a

It's the Ender 3 V3 KE which gets quite wobbly with the filament is on its default top position so I used these two prints to mount it to the wall. https://www.printables.com/model/631011-creality-k1-k1-max-wall-mounted-spool-holderhttps://www.printables.com/model/381797-filament-spool-stopper-for-c

an ender 3 v3 ke i have had ocasions where i can do 50 at once but that only happens about 1 out 20 ive tried plus the bases dont seen to lign up right i did probably 100 i had to glue them on and only anout halfe worked out i dont have that issue with the ones that print all in one peice but i have

Es para "divertirte" o para emprendimiento? Si es para divertirse, no te la recomiendo, pero tengo una ender 3 v3 ke (no es la mejor pero tampoco la peor) y te puedo asegurar que puede volverse muy estresante, estoy seguro que el 90% de la gente que se compró esa impresora o la usa muy ocasionalment