P1S

I own a p1s combo purchased from wol3d. 6 months in, the ams was unable to feed the filament. They requested to ship the part to Mumbai (I live in Delhi). They then replaced the faulty part and sent it back in the same packaging that I shipped them. I expected sealed bambu replacement spare parts bu

I’ve owned a bunch of printers including the P1S, a few different Ender 3 models, and other brands. Also tired of tweaking and fiddling. My P1S has not been trouble free. From your list I would probably go with the P2S. I do need 2-color for some of my models though, and when it works correctly the

I’ve had 8 or 9 different printers over the last 10 years of so, usually running 2 or 3 at a time, replacing whichever was falling out of favor. One of my current printers is a P1S. When it was time to replace the last printer I went with a Q2 combo rather than another Bambu. It is a very capable pr

Bedenke bitte beim Lauf das der P1S den Status EOL erreichen wird. Also das seitens BambuLab die Ersatzteilversorgung eher spärlich ausfallen wird weil der P1S ursächlich nur ein Consumergerät ist und die X1 Reihe eher Richtung professionellen Anwender tendiert ( ja ich weiß das die meisten kommerzi

Consider your REAL budget, as well as the size of things you intend to print. PLA and PETG are relatively easy but going beyond those an enclosure can be beneficial along with filters and/or ventilation. A majority of the mid-range printers (I would go with a CoreXY printer over a bed-slinger today

P1S and AMS1 combo i did use it but at ~90 hrs it decided it hated the printer and just started ramming filament into the extruder pegging the buffer at max and tripping out the processor safety stopping the print. disassembled the system twice and it never would print again just kept repeating and

That's definitely your belief, but my Qidi Q2 produces way better prints than my friends H2C for quite a lot less while being customizable. Build plate is a bit smaller, but the Max4 beats it with similar capabilities, higher temps and same quality. Still for cheaper. Look, I'm not here to argue wit

Personally, I think I will stay away from Bambu Lab, which tends to close their ecosystem. I have been burned already by Cricut, among other things. That said, what advantage the P1S can have over the ECC? Mmm, easy nozzle swap. People say Bambu printers are dead easy to use, but I had no problems w

Thank you for Your answer. But it will not help. I’ve done all that you have suggested multiple times and it doesn’t help. Let me give you some context to myself. I run 13 printers. 5 run 24/7 and the others probably once a week. Mind you they’re very slow so once a week is like a 3-4 day print. I h

it's fine but it's a little loud and annoying, doesnt have the same polish as my other pritners; not having AMS this late is not doing it any favors. I shouldve just bought a bambu. the money I saved vs. just getting a P1s doesnt seem like it was worth it. tbh I wouldn't trust Elegoo. CC2 price is n