P1S

If you're looking at Bambu the X2D is definitely the way to go. There are just too many reasons it's so much better of an option than the others. Another option would be to look for a used p1s to get your feet wet. Combos will be selling cheap with people buying u1 and x2d, and needing space. You wi

I own a p1s combo purchased from wol3d. 6 months in, the ams was unable to feed the filament. They requested to ship the part to Mumbai (I live in Delhi). They then replaced the faulty part and sent it back in the same packaging that I shipped them. I expected sealed bambu replacement spare parts bu

When I started looking at replacing my Ender 3, I was looking at the X1Carbon.A nice machine, does everything I wanted, mate had just bought one, it was great.. Then I looked at the P1P and P1S, both more or less good enough for what I wanted, then, as everything does these days, I started getting a

So in conclusion you bought a P1S and an AMS 2 separately instead of the combo? Hence you didn’t get a buffer Yes Bambu have done this before, but caveat emptor. Black Friday is around the corner so with the £150 coupon it might still be the wrong time to buy. I agree with you it does leave a bad ta

For the moment you can supposedly safely update to the latest firmware. The lockout controls aren't implemented yet for the P1S. Operative word being YET. Unfortunately it seems to have had little effect, as the updated firmware with lockout is required for the X1C so far if one wants to use all fun

Another point of discussion is planned obsolescence. Bambu Labs has already sunset the XIC. They are no longer offering customer support nor stocking replacement parts past 2027. I would expect they'll have similar plans for the P1S/P2S and the H2 series. If a critical part fails, lets say the main

I’m pretty much going to be exclusively printing PLA, not sure if that’s enough to justify an enclosure or not. An enclosure provides practically no benefit to PLA (or PETG or TPU). The P1S recommends disabling it by removing the top glass. The P2S (and X2D) use a fan to blow in fresh outside air (a

If you print ABS, you at least want an enclosure, so A1 is out. You can do PETG on A1 and it is more heat resistant than PLA. Keep in mind ABS is very toxic. Look into styrene poisoning. You want to make sure you aren’t breathing that in. ABS/PETG fumes aren’t as bad, more of an irritant, but you wa

P1S and AMS1 combo i did use it but at ~90 hrs it decided it hated the printer and just started ramming filament into the extruder pegging the buffer at max and tripping out the processor safety stopping the print. disassembled the system twice and it never would print again just kept repeating and

I have 3 Kobra X, a P1S combo, aP2S combo, and a K2 Pro combo. I’d suggest getting the Kobra X hands down as it’s the best printer I have and it’s well under the $500 price tag. If you want a bigger plate I’d recommend you save a little more money and get one of the tool changers. I don’t recommend