Photon Mono M5s Pro

Every printer ever made has had someone with a failure out of the box. And as has been said a thousand times, people don't post when they're happy. The only printer I've had that was a constant pain was the m5s pro and Anycubic stopped selling that one conspicuously quickly. My ultra 16k has been a

I have personally experienced this before on used machines. Here’s what worked for me: Fill the hood with hot, concentrated Mean Green and let it soak for a while. After that, buff it out with Meguiar’s PlastX — the kind made for restoring cloudy headlights. Honestly, treat it just like a cloudy car

That's this page, correct? https://store.anycubic.com/products/adapter-1 Unfortunately, this isn't the adapter for your model. Though it says it's for the Photon Series, implying all Photon mosel printers, it's actually only compatible with a very skint few models, listed on the page (Air Heat& Pure

I did the light test with a bar blade and I had a very slight (maybe less than 1mm) light shine through. I can't guarantee the problem was with the plate or the blade however. I don't own anything like a steel rule or a tri-square so it would come out of pocket to test it again. I use a 32gb stick I

Just don’t rely on their “AI” detection. It’s a joke. Remote viewing is great though. The reality is it takes so many layers just to get the build plate above the vat even if they fixed their AI detection you’re still quite a way into a print before you would even know if you had a failure. I’m not

I own the m5s pro and the ultra 16k. Two things that set apart the ultra for me. Tank heater, wireless environment. Both need to be leveled. Both printed great to start, but after about a year the m5s prints but gives all kinds of issues that I think are related to issues with the Z axis that I have

Everyone that says yes will have had a failed lcd. E everyone that doesn't say yes will have not had one and everyone who isn't here looking at boards will also have not had one and since that number is likely significantly higher than the number of people that say yes, there's just literally no way

I too got the m5s pro in August of last year. I've had a lot of success with print quality and general reliability, HOWEVER: ever since new, the touch screen has been quite finicky , but not to worry, I was one of the lucky ones that managed, with difficulty, to make the wifi work to my satisfaction

I have the m5s pro. Does the rerf print? Did you check the screen (run the exposure test in the dark or with a paper over it)? I've had random problems after switching resins a few times and basically went back to the Anycubic standard and had to increase the lift distance significantly to get it to

I am done Anycubic in the garbage. Now Saturn Ultra 4 12k or 16k? I bought the m5sPro last summer struggled for a year. Did everything. Switched to FEP, changed settings all that stuff. I will never buy another Anycubic product again and neither will anyone I know.