ER7206

If you’re looking at Omada for a homelab on ~200€, the usual go-to is the TP‑Link SafeStream Gigabit Multi‑WAN VPN Router TL‑ER7206 (or the slightly newer ER7406) as your gateway + a separate AP. The ER7206 has 1× Gb SFP + multiple Gb Ethernet, VLAN (802.1Q), firewall rules, central Omada SDN manage

Here my current stack Router: tp-link ER7206 Managed switch: tp-link SG3428 Access points : 3x tp-link EAP245 One mini pc (ThinkCentre M93p) running Debian/Docker with Omada controller Home assistant and related home automation containers (Zigbee, Z-Wave, etc.) Another mini pc (HP EliteDesk 800 G6)

I was able to acquire many used tp link deco/archer/omada products and install for myself, families and friends, and never failed. Largest omada setup was ER7206 with 20 EAPs that occasionally requires to handle 300+ clients (avg around 100) and never had a single hiccup. Few times, bad firmware upd

Depending on your Telus setup, you can also just take the SFP module out of the modem and put it in your own router (mine was an TP Link Omada ER7206) and it just works. Getting support is more difficult but there are ways

TP-Link Omada range has gateway routers that would work very well, and can work in failover or load-balancing modes. ER7206 for a gigabit WAN, or ER707 for 2.5Gbps WAN https://www.omadanetworks.com/uk/business-networking/omada-router-wired-router/

I would resist using multiple routers. You may run into problems with rogue DHCP and duplicate IP addresses unless you do a ton of configuration and have some level of control over what people plug into the network. There will be many recommendations for this situation, but here's how I did multi-wa

I second this. The TP-Link Omada is a prosumer range. Personally I have two WAN (broadband) connections and I'm currently using the ER7206 to do exactly what OP is after. It can handle three connections. The ER7206 Multi-wan router (gateway) has load balancing, and also has a Application Optimized R

Uy same tayo TP Link Omada. Hindi ba bottleneck yung ER605 sa iyo? I find na di niya kayang i-maintain yung 1gbps with DPI enabled hence I upgraded to ER7206. 10-15TB lang usage namin per month. Mostly used by my SMB server kasi nagreremote edit ako, I also run a public Minecraft server for my frien

I wanted to use my 2 MS Server 2019 DHCP/DNS/AD servers for the Guest VLAN. But I found that before the servers would resolve a relayed DHCP request, I'd have to add the full "Routing and Remote Access Routing" "Feature" to them. That gave me a headache thinking about it. So, I want with the KISS ap

Sure! You’re absolutely right. I’m incredibly busy, but I think I can offer some pretty significant insights. Here’s the basic information I can provide at this time. 1- Cost/benefit - I wanted to replace the ER605V2 router with a product that has more hardware capabilities. The only ones I found we