Archer BE400

Ik this router does not have a 6GHz band (cz 6GHz is not allowed to use by public in india). Should i still buy this router or someone please suggest me another router in the same budget.

I use a TP link BE400 with plusnet (FTTP/full fibre) , other routers will also work just as well and possibly better. There will be a little bit of setting up, bit its not difficult , Plusnet have a guide on how to use your own device on their service here: https://www.plus.net/help/broadband/broadb

Hello guys, can someone tell me if this router speed only around 200mbps or 20-30MB/s when transfering data locally, or the speed of share storage.

I test storage speed with Ethernet cable, the speed is correct. But if I use wifi it only has 20 to 30MB/s, but this router should have 2.5gbps theoret

I don’t live in India, i am located in USA, however be400 is a solid choice but hear me out, tp link suffers in software issues, lack of updates and they take forever to release one. You will enjoy it but be prepared to deal with it.

True that. I bought the TP-Link Archer BE400 Wi-Fi 7 router, and the experience has been next-level. I turned off Wi-Fi on the Airtel router, used it only as a modem, and connected the TP-Link Wi-Fi 7 router for internet transmission. Since then, I haven’t faced any latency or speed issues at all.

I set up a pair of Archer AXE75 yesterday and so far so good. Easymesh wasn’t that easy to set up but after some fiddling got it going. I can get the 6GHz band to my only device (Alienware laptop) that supports it on the second floor, with main router in the basement, which is great. I did notice ho

I recently upgraded to the 1 Gbps plan and forced Airtel to replace my old Wi-Fi 4 router with a Wi-Fi 6 one (Nokia AOT4221NK). It works fine, but many settings are locked on the admin page. So if you’re looking for a router with full control and unlocked features, you’re better off getting your own

Since I already have postpaid and a few other Airtel plans, it came to around ₹1500 for 15 days, which is normal for me. I’m also planning to buy the TP-Link Archer BE400 6500 Mbps Wi-Fi 7 Gigabit Router in this BBD sale.

The DECO mesh network needs another deco unit so: TP link BE400/6500 wired to Deco unit 1 Deco Unit 2 remotely connects to Deco unit 1, however both units need to be in wireless range of each other, if not then you will need to hard wire them or re position them so they are in range The TP link rout

I have both tp link be400 ( this one is expensive ) as well as a tp link archer c6 ( this is sufficient) . How many devices have you connected with the Airtel router wirelessly? And have you checked speed through lan cable ?