PM981

You do not notice SSD speed differences in daily use. The Samsung 990Pro is the benchmark in PCIe4.0 SSDs - much faster on paper and in benchmarks than the OEM PM 981. I have retrofitted quite a few of those in xx80-generation Thinkpads and the faster speeds compared to the old Samsung PM981 these s

I contacted the support. Dear Samsung Support Team, I am writing to you today not with a complaint, but with a testimonial about the incredible durability of your V-NAND technology. I have been using a Samsung PM981 256GB (MZVLB256HAHQ) in a high-load environment hosting an Arma 3 server. According

Processor: Intel: 10th gen or older (anything newer is not supported) AMD: Any Ryzen CPU with integrated graphics up to 7000 series Graphics: 90% of laptops use integrated graphics so as long as it is 10th gen Intel or older or AMD you are fine. But if it is a laptop with a dedicated graphics chip a

Samsung PM981 SSDs are lottery, some works, some not, but I used OP Core simplify on ThinkPad T580 with same specs and it works, so gave it a shot and then start troubleshooting, also there is always hackmate

Lenovo laptops usually come with Samsung PM981 ssd which is incompatible for hackintosh, so you may need to swap it out for a compatible one

I’ve owned the r10 in 2024 and upgraded to sell.Parts consisted of Thermaltake toughfan pro replacing the AIO exhaust fan with no idle static pressure and poor performance at high rpm, I’d use arctic p12 1800rpm now. Better gpu gtx 1080 but I’d get used RTX 2070 or better now. SSD used a 1tb Samsung

I’ve hackintoshed this exact same setup so it’ll work fine. Only thing you’ll need to change is the Samsung SSD for a WD Black because I’m guessing it’s a PM981 (very common) which isn’t compatible at all. Just a warning, the kext for graphics doesn’t work with chromium acceleration so Google chrome

After swapping the PM991 ssd with a PM981 I decided to try hackintoshing and it works pretty well. Did the EFI mostly myself but pulled a few things from valonxy’s T480 EFI. The touch screen etc. all work, the only thing that doesn’t is thunderbolt 3 but since I am probably not going to use it I am

You’ll need: External SSD / enclosure Steps: Install Windows to the external SSD Boot into Windows Install VMWare Install macOS via DMG to the NVMe SSD through VM Build an Opencore EFI on a USB stick Boot the Samsung SSD from the USB stick EFI Deal with endless glitching and unreliable boot because

If you’re kernel panicking when you start the download it’s likely a compatibility problem with your SSD. Since it’s a Samsung 980 it’s probably incompatible, Samsung NVMes are not supported. Some might work but others like the PM981 are absolutely not supported and despite what a few people who hav