KH 310

Look for sealed speakers, they have no bass reflex port to extend the low end and and can sound bandwidth limited depending on the amount/size of the driver. HEDD offers a physical option to switch to closed speakers by supplying plugs for the ports on their speakers. Amphions are sealed speakers, t

all of those you namer dare not in the upper tier. look at neumann kh310, genelec, ks audio, geithain etc

Neumann KH150 + MA1 ; slightly over budget but quality and imo by far the best in this price range/class. Will obviously not sound like ATC, only ATCs will - the neumanns are more linear. Edit: I have the KH310 + KH750 + MA1. I’ve been to many (high end) studios and my setup punches far above its we

So the standing wave of your room is 36.5hz, and therefore, every multiple of that (73hz, 109.5hz, etc.). Have you measured your room response with a measuring mic? It might be better to suspend the bass traps away from the wall. This will cause the room to become smaller, but it will provide better

But when I sat down to demo the Neumann KH310, with an aluminum tweet that rolls off at 19k, and the Barefoot Footprint 3, with a soft "ring radiator" tweeter specced to 40k, the difference in the quality of the top end was STAGGERING That's not a good way to test for the impact of ultrasonics since

Under $1000 total, I really like the Yamaha HS8 Monitors. If your budget is considerably higher, Neumann KH 310.

Just googling, the frequency response curves of everyone I’ve looked at aren’t anything approaching accurate. I’m sure the ones in professional studios are different. Usually the price of audiophile speakers is paying for cases that don’t resonate, coils/cones/crossovers that don’t ring, and cone ma

Save until you can go Neumann Kh310 or Genelec 8361A that’s going to be the real big jump

The only thing that sounds like Barefoots is Barefoots, for better or worse. I love my KSDs, and I’d also support Amphions or Neumann KH310. None are particularly like Barefoots though.

Neumann KH310 or KH120 II if you want integrated DSP on the condition that you buy or borrow an MA1 measurement mic. Flat as a pancake in the right space.